Plasma Air Bar
The Plasma Air BAR is a needlepoint type bipolar ionizer arranged in a long, narrow bar design. The unit is installed at the air entering side of the cooling coil of an air handling unit (AHU) or roof top unit (RTU). The installer mounts the Plasma BAR using the provided brackets insuring that the ionization needles are pointed down to avoid debris accumulating on the needles. BARS can treat from 7,500 CFM up to 20,000 CFM. For higher airflows, multiple BARS will be used. The BAR operates on 12V DC which is supplied from the Control Panel using the provided low voltage power cable. The Control Panel is capable of accepting 24V
AC or 12V DC. For 120V/230V applications, a 12V DC. power supply will be provided.
HVAC Mounted: Whole Building Air Purifier
Plasma Air HVAC-mounted ionizers use proactive air purification technologies to deactivate airborne viruses, such as Coronavirus. These bipolar ionization devices create millions of positive and negative ions. When released into airways, this is a proven method of destroying viruses.
Plasma Bar HVAC Ionizer
Plasma Bar ionizers install in the supply air ductwork or air handler, most commonly in the AHU or RTU, before the coil. Ionizers go in both new equipment or get retrofitted into older systems. First, the positive and negative ions generated by the device get released whenever air is flowing through the ductwork. Next, the ions form a cluster around harmful viruses, mold, and bacteria. Then, they trigger oxidation in these particle’s cells causing a breakdown of gases.
Contaminant Reduction with Plasma Bar
Similarly, Plasma Air Bar ionization helps to neutralize volatile organic compounds and neutralizes odors. Coronavirus is too small to get trapped by most filtration systems. However, the charged clusters of clumped particles created when airborne particles are neutralized by plasma ions are much easier for filters to catch and remove from the air since they create a “snowball” effect, getting larger as the clusters increase the size of the dust particle. When those dust particles are removed from the air flow, the result is a cleaner, healthier environment with less risk of infectious outbreaks. Read more...
For a comparison of the Plasma Air 7000, Plasma Air 600, and Plasma Air Bar, see our Commercial Plasma Selection Guide.
Remember the Plasma Bar Control Panel
Leading Quality, Labor Saving Design
This unit comes preassembled to save huge amounts of time on the jobsite. Commercial quality, remote placement for convenient mounting inside AHUs. Industry leading needlepoint ionizer technology available in lengths of 18 inches up to 96 inches in 6 inch increments to suit a wide variety of AHU or RTU size applications. This unit is UL2998 validated for zero ozone emissions. Accept no other, especially if it requires your crew to assemble it on the job site. Save your crew the hassle, save labor hours, and save the job from unnecessary setbacks from accidental damage during onsite assembly.